The Power Supply is suitable for most general laboratory experiments where close voltage regulation and DC ripple are not important.
Output is up to 12V. AC or DC switched in 2V steps.
Terminals are provided for both AC and DC outputs and they are 4mm socket head, spin free design.
The mains cable is removable for ease of storage and replacement.
Note that this unit is similar to the LB2633-001 power supply, but provides a larger current output. The housing is also a little larger than the LB2633-001 unit.
It is fitted with a larger transformer and rectifier and cannot be provided in the sloping panel format.
- Power Supply, General Purpose
- Manufactured In Australia
Specifications
| Physical Size | 180x175x110 mm (L x W x H) |
| Weight | 3.7kg |
| Input | 220/240V.AC. 50/60Hz 0.5 Amp Standard Removable Mains Cable |
| On/off: | By illuminated mains on/off rocker switch on front panel. |
| AC Output | Switch Selected 2, 4, 6, 8, 10, 12V.AC (Nominal) at 10 Amp Continuous |
| DC Output | Switch Selected 2, 4, 6, 8, 10, 12V.DC (Nominal) Full Wave Rectified &Unfiltered 8 Amps Continuous & 10 Amps Intermittent |
| Protection: | Overload and short circuit protection is by an audible, internal, automatically selfresetting thermal overload. |
